PLASTIC MOLD STEEL

DIN 1.2311 Plastic Mould Steel

Plastic Mould Steel 1.2311

Equivalent grades: DIN 1.2311/ 40CrMnMo7, AISI P20, 618（ASSAB）
Chemical composition:

C	Si	Mn	Cr	Mo	P	S
0.35-0.45	0.20-0.40	1.30-1.60	1.80-2.10	0.15-0.25	0.03max

Available sizes: Round dia 16mm to 600mm; flat 16 - 400mm x 200 – 800mm

Manufacture: EF/ESR, hot forged/ hot rolled

Surface condition: black/grinded/rough turned/milled

Delivery condition: annealed/quenched and tempered

Hardness: annealed, 235HBS max/ after Q+T, hardness 28-35HRC

Characteristics: good machinability, better polishability then 1.2312, similar to AISI P20

Applications: plastic moulds, frames for plastic pressure dies, hydroforming tools

(All technical information is for reference only)

PREVIOUS：DIN 1.2312/AISI P20+S Plastic Mould steel NEXT：NAK80 Plastic Mould Steel